- More Baby & Kid
- More Cars
- More Electronics
- More Health & Fitness
- More Hobby & Crafts
- More Home & Garden
- More Other
- More Outdoor
- More Pets
SolidGuides.com may get an affiliate commission when you buy through links on our website. Read More.
The best cordless impact wrench is going to be able to handle tough jobs like lug removal. Not all impact wrenches are made equal. That’s why we searched high and low to find you the best of the best.
We’ve compiled a list of 10 cordless impact wrenches to make your search for the best one as easy as possible. Today’s models are both lightweight and versatile. We think you’ll be mightily impressed with the power these cordless units boast.
Don’t Have Time to Read the Whole Article?
It might eat through battery power a little faster than other models, but Milwaukee’s Fuel packs the power of a pneumatic. It boasts an insanely high torque that you just don’t see on many cordless impact wrenches.
It was a close call, but Ingersoll Rand’s W7150 edged out the competition to take second place. It has a long-lasting battery that gives you plenty of power for a wide variety of jobs.
There are eight more entries that have their fair share of features. Read on to find out which one best suits your needs.
Milwaukee’s Fuel impact wrench is one of the most powerful units in cordless form. It boasts a staggering 1,000 foot-inch fastening torque that will make short work nearly any job.
Do you have stubborn rusted nuts or lugs that refuse to pop? The Fuel impactor has 1,400 foot-pounds of torque to remove them with ease. No need for pneumatics here.
Just slide in a fresh battery and start driving or removing. The wrench will automatically slow down to 750 RPMs for more effectiveness.
Speaking of removal, Milwaukee’s wrench handles the job twice as fast as normal cordless impact wrenches.
You get four modes of drive control along with its bolt-removal mode. You’ll have greater control over all the various jobs throughout the day. Just switch to the desired mode and off you go.
To give you the best in comfort, Milwaukee’s Fuel has a rubber over-mold. This helps reduce stress and pain in your arms and hands.
Changing sockets is easy for you, too. There are no tools needed. Just use the included ½-inch anvil ring to quickly change out attachments.
Forget pneumatics. Milwaukee’s Fuel impact wrench has enough power to do the job without the hassle of lines. Best of all, it weighs less than six pounds, making it accessible for nearly anyone wanting to work with its power.
Ingersoll Rand’s W7150 is a powerful addition to your tools. It rivals many pneumatic options, yet it’s completely cordless for freedom and flexibility.
For removing nuts, you get 1,100 foot-pounds of torque. The maximum reverse torque rates at 780 foot-pounds.
A 20-volt lithium-ion battery powers the unit. It is long-lasting, giving you plenty of juice to complete most jobs before needing to recharge.
At 6.8 pounds, the W7150 is lightweight and versatile. Yet it features steel-lined aluminum hammer-casing for a tough and durable companion on the job site.
As a great model for automotive jobs, Ingersoll Rand’s impact wrench is able to remove lug nuts with little effort.
To ensure that your hands aren’t strained while you work, Ingersoll-Rand included a soft-touch over-mold along the handle. This also serves to sustain your grip during vibrations.
Weighing under seven pounds, the W7150 is easy to control. Yet it packs plenty of punch to handle even the most stubborn nuts and lugs.
If you need the strength of a pneumatic impactor but want some freedom, check out Makita’s XWT11Z. It’s packed with features, so let’s break them down.
The variable-speed trigger gives you more control over each job. You can set it to 1,600, 2,100, or 2,800 RPMs. This gives you either 1,800, 2,600, or 3,500 IPMs.
It’s a lot of torque in a small package. The compact design makes it easy to maneuver, yet it’s tough and durable enough to take a beating.
For safety, an auto-stop feature has been implemented to ensure stopping power within two seconds. The brushless motor is quiet and clean. It can give you up to 210 foot-pounds of torque.
Working in a dark environment? Super-bright LED lights are below wrench you better illuminate your job.
At just 3.8 pounds, you get a lot of power in a lightweight body. Its rubberized handle lets you work for extended periods without straining your arms and hands.
Talk about tough. Makita leaves quite the impression with an impactor that rivals pneumatics. It boasts 740 foot-pounds of torque. Breakaway torque rates 1,180 foot-pounds.
You have a lot of control over how much power to apply for each job. The three-speed variable trigger lets you switch between 900, 1,000, or 1,800 RPMs. A brushless motor runs cooler and lasts longer than standard carbon-brushed motors.
The unit is powered by an 18-volt lithium-ion battery. Unless you already have Makita tools with this type of battery, be sure that you select the option when buying to give you the entire bundle. Makita gives you the choice for just the impact wrench only.
You can expect to get around 220 impacts per battery charge. There is quite a bit of power coming out of this unit, so unless you torque it down some, it’s going to eat battery pretty quickly. Thankfully, it also recharges rather quickly.
You get a lot of power in a lightweight body. It is easy to operate and changing sockets takes little time or effort.
With 330 foot-pounds of torque, PORTER-CABLE’s impactor is plenty strong enough to handle your workload.
Plan on working around automotives? The PCC740B has a protective housing that resists harsh chemicals. You don’t have to worry about corrosion damaging your wrench.
To give your arms and hands a break, there’s a comfortable molding on the handle. Also easy on your hands is the changing of sockets. You get a convenient ½-inch hog ring for fast and easy swap outs.
The motor rotates at an impressive 1,650 RPMs, making driving large fasteners a cinch. And when you need to dial it down a bit, the wrench has a variable speed trigger for precise control over any job.
This is the tool only. If you want the battery and charger, you’ll have to purchase those separately or find a bundle that includes them.
330 foot-pounds of torque
Variable-speed trigger
Weighs just 6 pounds
1,650 RPMs
½-inch hog ring
At just six pounds, you should have no trouble wielding the PORTER-CABLE PCC740B. Its rubber-grip handle takes the stress and strain off your hands for a more relaxed operation.
DeWalt’s impact wrench set is an impressively powerful impact wrench. Its 1,200 foot-pounds of torque means it is versatile and can handle a wide range of tasks.
This makes the DCF899HB a great choice for job sites. You won’t have to worry about running short on power thanks to the extended battery life. DeWalt’s 20-volt XR batteries are known for their greater capacity.
Depending on the nature of the job, DeWalt included a variable speed trigger. This lets you adjust the speed and power as needed.
Regardless of the job, you’re getting a whopping 700 foot-pounds of torque. This will make short work of nearly anything you throw at it. Surfaces like plastic, concrete, and metal don’t stand a chance.
As a safety precaution, DeWalt included an electrical braking system to prevent dangerous kick-backs. Work with confidence that you won’t suffer an injury.
For even more safety, you get a bright LED light. Your visibility will be greatly increased while you work.
With so many bonus features and accessories, DeWalt loads you down with plenty to play with. Just expect to pay for all the goodies. If you’re looking for just an impact wrench, you may want to look elsewhere and save some money.
DeWalt’s DCF889M2 gives you loads of power and features at a great price. Its brushless motor boasts 400 foot-pounds of impacting force. Brushless motors are generally less noisy, too.
You get two batteries to ensure you never run short on juice. You’re going to pay a little more for the bundle, but it gives you everything you need to get the job done. The battery life is incredible. DeWalt was able to give you around 24 hours per charge.
Looking for better visibility while you work? You get a bright LED light to make your jobs easier to see and safer. Speaking of safety, there’s an electronic brake system that stops kick-backs while you work.
The handle is insulated with a soft-touch grip that works to reduce fatigue. You get a classic DeWalt nylon tool bag to haul your batteries, charger, and impactor.
You get a three-year warranty in the event any parts malfunction. Simply contact DeWalt and they will guide you through the process to either repair or replace your defective unit.
This kit makes a great choice for tasks around the house or construction site. It gives you a great deal of control so you get just the right amount of power.
With power like this, you’ll have no trouble getting even the toughest jobs completed. And with the included fast-charger, you don’t have to wait around to use your wrench.
Craftsman has been in the tool industry for a very long time. They have nearly 100 years of experience. It’s no wonder they would try their hand at a cordless impact wrench.
So, how does it fare? Quite nicely. It boasts an impressive 300 foot-pounds of torque and is capable of reaching 3,000 RPMs. That’s a great deal of power for a unit that weighs just a little over three pounds.
Its battery is long-lasting and works with all other Craftsman tools that use the 4Ah XCP lithium-ion battery. You can expect to get four times the battery life and 20% more torque. Some batteries bog down in extreme temperatures.
Not this one. It can operate without issue in weather as low as 5 degrees and all the way up to 158 degrees.
Stubborn nuts and bolts seemed to remove with little effort. Driving and removing were equally powerful.
For maximum visibility, Craftsman installed three ultra-bright LED lights at the base of the unit. To prevent your hand from slipping, the handle has a micro-texture overmold for the best grip possible.
Many cordless impactors struggle on lug nuts. It’s often the ultimate test to see if the tool will stand up to the challenge. The Craftsman C3 removes them easily, giving you confidence and reliability.
Ryobi makes plenty of power tools. This seems to be one of their heavier-duty units. It’s made rather well and has a decent amount of torque packed in.
The level of torque rates at 300 foot-pounds. And with 3,200 impacts per minute, you know you’re getting greatness. While it struggles a bit with stubborn lugs or rusted bolts, it has enough power to handle light to moderate jobs around the house and job site.
A variable speed trigger gives you control over each task. If you have a job that doesn’t need a lot of power, simply dial it down a bit. You can easily switch between forward and reverse.
The handle has a rubber grip to help reduce strain on your hands and body. You get an 18-volt Ni-Cd battery to power the unit. You get this and the required charger when you buy this set.
This baby is light! It weighs in at 1.61 pounds, making it the lightest unit among our rankings. This makes it a great gift for those who need a more manageable impactor.
Hitachi gives you plenty to worth with here. Their bundle has two long-lasting batteries and a charger. You get a solid carrying case for easy transportation to and from the job site.
With 225 foot-pounds of torque, it’s got the kick you need to bust lugs, drive bolts, and more. For greater visibility, an LED light is built-in below the impactor area.
The variable-speed trigger lets you choose between four modes that range from 1,000 to 2,700 RPMs. This allows you better control over a wide range of tasks for precise operation.
An 18-volt lithium-ion battery supplies power to the impactor. This provides plenty of life throughout the day. And the backup battery is icing on the cake.
Being so lightweight, you’ll find yourself using this longer and with less strain. The rubberized handle gives you much better control while improving your grip.
The Hitachi WR18DBDL2 is a versatile and tough little impactor. It weighs just a tad over three pounds. It’s a great starter unit for those who need power.
Rusted nuts and bolts tend to cause a lot of headaches. Cordless impact wrenches are the right tool to take care of stuck nuts and bolts.
The problems arise when you have to choose a model that will perform the way you want it to. There are a lot of companies who create cordless impact wrenches, but not all of them create high-quality products.
We have decided to help you out with a quick guide that will show you that buying a new tool doesn’t have to be a hassle. We have done all the necessary research, so you don’t have to.
There is no official classification of cordless impact wrenches into different types. So, we decided to classify them according to their shape. Most of the time, the shape of the tool will influence the drive size.
Before we continue, we need to talk about the drive size. The ¼ inch drive size is best used for small screws. On the other hand, the ½ inch drive is suited for larger nuts and bolts. Most of the time, you will notice that the drive size ranges from 0.25 to 1.5 inches.
Before you can make an educated purchase, you need to know more about the useful features of cordless impact wrenches.
The biggest advantage of cordless impact wrenches is that they are fully enclosed. You will have no need to maintain the internal parts. But, this shouldn’t stop you from taking your tool apart if you know what you are doing. We don’t recommend you to take apart your cordless impact wrench since that will likely void your warranty.
The only maintenance that you will need to do is to keep the connections clean. Bear in mind that the battery is a part that can fail if you don’t keep it safe. Remember to store your batteries in a cool environment, and they will serve you well for a long time.